“A” PACKOFF (LOWER ASSEMBLY)

 

The Type “A” Packoff is used to straddle and seal off holes in the tubing. The upper and lower Type “A” Packoffs are usually joined by spacer pipe. Upper and lower tubing stops are used to keep the packoff assemblies in the locked position. In special applications, an upper or lower can be used as a tubing plug in situations where during well completion, landing nipples were not installed.

 

SPECIFICATIONS

  2" 2 1/2" 3"
Max. Running O.D. 1.844" 2.281" 2.700"
I.D. 1.047" 1.125" 1.531"
Fishneck - 1.750" -
Shear Pin 3/16" Brass      1/8" Aluminum and 3/16" Brass     5/16" Aluminum
Upper Connection      1" NPT 1 1/4"-10rd EUE 1 1/2" NPT
Pulling Tool 40JDC200 40JDC250 40JDC300
Running Tool 40JDC200 40JDC250 40JDC300

 

ASSEMBLY

  2" 2 1/2" 3"
Part Number            13CC2200      13CC2250      13CC2300

 

COMPONENTS

  2" 2 1/2" 3"
Lower Mandrel Core     13B00073 13B00258 13A00310
Element (2) 97A00813     (2) 97A01226     (2) 97A00597
O-Ring 97A00814 97A01227 97A00598
Cap 13B00074 13B00260 13A00312
Body 13B00072 13B00259 13B00068
Lower Body Stop 13B00070 13B00069 13B00067
Split Ring - - (2) 13B00066
Running Adapter - 13B00262 -
O-Ring #123 #128 #133
O-Ring #218 #325 #329
O-Ring - #224 -