BRASS WEDGE & SLEEVE TYPE ROPE SOCKET

 

 

The Brass Wedge and Sleeve Type Rope Socket is used as a means of connecting the wireline to the wireline tool string. The line is run through the
body and sleeve and around the brass wedge. With the line set in the provided groove of the brass wedge, the line and brass wedge are pulled
tightly into the taper of the sleeve.

 

SPECIFICATIONS

  1 1/4" 1 1/2" 1 3/4" 1 7/8"
Fishneck O.D. 1.188" 1.375" 1.750" 1.750"
Max. O.D. 1.250" 1.500" 1.750" 1.875"
Thread Connection       15/16"-10 15/16"-10 1 1/16"-10 1 1/16"-10
Overall Length 6.000" 6.000" 6.000" 6.000"
Roll Pin 3/16" x 1 1/4"    3/16" x 1 1/2"    3/16" x 1 3/4"    3/16" x 1 3/4"

 

ASSEMBLY FOR .092" Wire

  1 1/4" 1 1/2" 1 3/4" 1 7/8"
Part Number            43B00445    43B00450    43B00455    43B00460

 

ASSEMBLY FOR .108" / .125" Wire

  1 1/4" 1 1/2" 1 3/4" 1 7/8"
Part Number            43B00445    43B00450    43B00455    43B00460

 

COMPONENTS FOR .092"  Wire

  1 1/4" 1 1/2" 1 3/4" 1 7/8"
Body 43B00445 43B00450 43B00455 43B00460
Brass Wedge     43B00504 43B00504 43B00504 43B00504
Sleeve 43B00505     43B00505     43B00505     43B00505

 

COMPONENTS FOR .108" / .125" Wire

  1 1/4" 1 1/2" 1 3/4" 1 7/8"
Body 43B00445 43B00450 43B00455 43B00460
Brass Wedge     43B00506 43B00506 43B00506 43B00506
Sleeve 43B00505     43B00505     43B00505     43B00505