SAMPLE BAILER

 

The Sample Bailer is normally attached to the bottom of a Tubing End Locator to retrieve samples of fluids and solids from the well bottom.  This tool can be modified to accept a Drive Down Fishneck.

 

SPECIFICATIONS

  1" 1 1/4" 1 1/2" 1 5/8" 1 3/4"
Fishneck O.D. 0.875" 1.188" 1.188" 1.375" 1.375"
Max. O.D. 1.000" 1.250" 1.500" 1.625" 1.750"
Pin Connection 5/8"-11 15/16"-10 15/16"-10 15/16"-10 15/16"-10
Made Up Length       22.250" 22.563" 23.625" 23.688" 23.688"
Ball 5/8" 3/4" 7/8" 1" 1 1/4"
Steel Pin 1/8" x 1"      3/16" x 1 1/4"     3/16" x 1 1/2"     3/16" x 1 5/8"     3/16" x 1 3/4"

 

ASSEMBLY (COARSE THREAD)

  1" 1 1/4" 1 1/2" 1 5/8" 1 3/4"
Part Number            -                        50S00125    50S00150    50S00163    50S00175

 

COMPONENTS (COARSE THREAD)

  1" 1 1/4" 1 1/2" 1 5/8" 1 3/4"
Top Sub - 50DD2125 50DD2150     50DD2158     50DD2175
Tube - 50A00004 50A00011 50A00012 50A00020
Ball Bottom           -                 50SB7125 50SB7150 50SB7158 50SB7175
Housing - 50B01179 50B00809 50B01073 50B01074
Shoe - 50B01178     50B00808 50B01084 50B01351

 

ASSEMBLY (FINE THREAD)

  1" 1 1/4" 1 1/2" 1 5/8" 1 3/4"
Part Number            50S00100     50SFT125     50SFT150     50SFT163     50SFT175

 

COMPONENTS (FINE THREAD)

  1" 1 1/4" 1 1/2" 1 5/8" 1 3/4"
Top Sub 50DDF100    50DDF125 50DDF150     50DDF158     50DDF175
Tube 50A00007 50A00032 50A00034 50A00036 50A00038
Ball Bottom           50SB7100 50FT7125 50FT7150 50FT7163 50FT7175
Housing - 50B01445 50B01446 50B01447 50B01447
Shoe - 50B01178      50B00808 50B01084 50B01351