“TIC” SELECTIVE RUNNING TOOL

 

The “TIC” Selective Running tool was designed as an alternative to the “TICX” and “TICR” Running Tools. It uses a collet design to locate the desired landing nipple. With an easy change of the collet and/or the lower core, the tool can effectively run and set any “TICX” and “TICR” Lock Mandrel within a specific tubing size.

 

SPECIFICATIONS

  2" 2 1/2" 3"
Fishneck O.D. 1.375" 1.750" 2.313"
Pin Connection 15/16"-10 15/16"-10 1 1/16"-10
Bottom Thread 1/2"-13 5/8"-11 3/4"-10
Made Up Length         29.250" 29.250" 29.625"
Shear Pin 1/4" x 1 1/4"     1/4" x 1 7/16"     1/4" x 1 15/16"

 

COLLET OD's

  2" 2 1/2" 3"
1.781" TICR 1.844"           
1.875” TICX/TICR        1.938"    
2.000" TICR 2.063"    
2.125" TICR 2.188"    
2.188" TICR   2.250"         
2.313” TICX/TICR   2.375"  
2.562" TICR   2.625"  
2.750" TICX     2.813"
2.813" TICX     2.875"

 

ASSEMBLY

  2" 2 1/2" 3"
Part Number            41SEL***      41SEL***      41SEL

 

COMPONENTS

  2" 2 1/2" 3"
Top Sub 41SEL101 41SEL201 41SEL301
Collet 1.781” TICR *41SEL102 - -
Collet 1.875” TICX/TICR *41SEL103 - -
Collet 2.000” TICR *41SEL104 - -
Collet 2.125” TICR *41SEL105 - -
Collet 2.188” TICR - *41SEL202 -
Collet 2.313” TICX/TICR - *41SEL203 -
Collet 2.562” TICR - *41SEL204 -
Collet 2.750” TICX - - *41SEL302
Collet 2.813” TICX - - *41SEL303
Housing 41SEL106 41SEL206 41SEL306
Top Core 41SEL107 41SEL207 41SEL307
Bottom Sub 41SEL108 41SEL208 41SEL308
TICX Bottom Core *41SEL109 *41SEL209 *41SEL309
TICR Bottom Core *41SEL110 *41SEL210 -
3/8 x 16 x 3/8 Set Screw      41SEL111 - -
1/2 x 13 x 3/8 Set Screw - 41SEL211 41SEL211
Lug Segment (2) 41SEL112      (2) 41SEL212      (2) 41SEL312
Collet Spring 90NSEL11 90NSEL21 90NSEL31
Shear Pin Ring 41SEL113 41SEL213 41SEL313
Core Spring 90NSEL12 90NSEL22 90NSEL32
3/8” 16 x 1/4 Set Screw 41SEL114 41SEL114 41SEL114
Retainer Lug (2) 41SEL115 (2) 41SEL215 (2) 41SEL315
Collet Washer 41SEL116 - -

* Assembly comes complete with one collet and one core. Please specify when ordering.