“GS” PULLING TOOL (NEW STYLE)

 

The “GS” Running/Pulling Tool is a shear down releasing tool used to run or pull subsurface devices which have internal fishing necks.                        

 

SPECIFICATIONS

  4" 5" 7"
Fishneck O.D. 2.313" 2.313" 3.125"
Pin Connection 1 1/16"-10 1 1/16"-10 1 1/16"-10
Max. O.D. 3.625" 4.484" 5.875"
Bottom Connection      2 1/8"-12 2 1/2"-10 3 5/8"-10
Shear Pin 5/16" x 3 1/4" 5/16" x 4 15/64"    3/8" X 5 3/32"
Fishneck Engages 3.125" 4.000" 5.375"
Reach 1.156" 1.203" 1.438"
Made Up Length 12.313" 17.188" 20.500"
Set Screw 1/4"-20 x 5/16"    5/16"-18 x 3/8" -

 

ASSEMBLY

  4" 5" 7"
Part Number            40GS1401     40GS1501     40GS1596

 

COMPONENTS

  4" 5" 7"
Fishneck 40A00026 40B01178 40B01307
Core 40B00137 40B01179 40B01309
Top Sub 40B00138 40B01180 40B01304
Cylinder 40B00139 40B01181 40B01303
Core Spring 90N00237 90B00802 90N00245
Spring Retainer     40B00140 40B01182 40B01305
Dog Spring 90N00143 90B01506 90N01245
Dog Retainer 40B00141 40B01284 40B01302
Dog (4) 40B00142     (4) 40B01177     (12) 40B01301
Retainer Ring - - 40B01306
Nut - 40B01285 40B01308