“A” EQUALIZING STANDING VALVE

 

 

The “A” Series Equalizing Standing Valves are designed to hold pressure from above for use in intermittent gas lift wells to contain fluid in the tubing during an injection cycle.

 

SPECIFICATIONS

  11/4" 11/2" 2" 2 1/2"
Fishneck O.D. 0.875" 0.875" 1.375" 1.375"
Overall Length 10.500" 10.750" 12.625" 12.875"
Shear Pin 3/16" x 7/8"    3/16" x 7/8"    3/16" x 1 3/8"    3/16" x 1 3/8"
Stainless Steel Ball     3/4" 3/4" 11/4" 1 1/2"
No Go O.D. 1.313" 1.480" 1.860" 2.295"
Flow Area 0.135" 0.071" 0.233" 0.282"
Running Tool 40JDC125 40JDC125 40JDS200 40JDS200
Pulling Tool 40JDC125 40JDC125 40JDS200 40JDS200

 

ASSEMBLY

  11/4" 11/2" 2"     
2 1/2"
Part Number            14E00125    14E00150    14E00200    14E00250

 

COMPONENTS

  11/4" 11/2" 2" 2 1/2"
Retainer Head 14B01542 14B01542 14B00116 14B00116
Pull Skirt 14B01546 14B01546 14B00115 14B01541
Ball Housing 14B01544 14B01544 14B00119 14B01540
Stainless Steel Ball     95SS0075 95SS0075 95SS0125 95SS0150
Packing Barrel 14B01543 14B01547 14B00118 14B01539
Body - - 14B00117 14B01538
Packing (3) 91A01080    (4) 91BKR143    (4) 91A01079    (4) 91A00584
Nose 14B01545 14B01548 - -
O-ring (2) #213 (2) #213 (2) #221 (2) #327