“S” / “T” TEST TOOL

 

 

 

The “S” / “T” Test Tool is used to pressure test the tubing above the selective nipple in which it is set. The tool is designed to hold pressure only from above, allowing a small amount of flow from beneath.

 

SPECIFICATIONS - T

  3"
Q Test Tool  
Nut O.D. (Fishneck)     2.313"
Overall Length 9.250"
No Go O.D. 2.720"
Bottom Thread 1 7/8"-12
Running Tool 41H01300
Pulling Tool 40RB1300
Roll Pin 1/8" x 2"
T Locator  
Max. O.D. (Keys Retracted)         2.675"
Minimum I.D. 1.500"
Top Thread 1 7/8"-12
Bottom Thread 2"-12

 

SPECIFICATIONS - S

  2" 2 1/2" 3"
N Test Tool      
Nut O.D. (Fishneck) 1.375" 1.375" 2.313"
Overall Length 10.281" 9.969" 11.000"
No Go O.D. 1.865" 2.300" 2.865"
Bottom Thread 1 1/8"-12 1 11/32"-14 1 7/8"-12
Running Tool 41H01200 41H01200 41H01300
Pulling Tool 40RB1200 40RB1200 40RB1300
Roll Pin 1/8" x 1 3/16"    1/8" x 1 3/16"     1/8" x 2"
S Locator      
Max. O.D. (Keys Retracted)        1.812" 2.203" 2.760"
Minimum I.D. 45/64" .875" 1.500"
Top Thread 11/8"-12 1 11/32"-14 1 7/8"-12
Bottom Thread 13/16"-14 19/16"-12 2"-12

 

ASSEMBLY - T

  3"
Part Number            14T0*300

 

ASSEMBLY - S

  2" 2 1/2" 3"
Part Number           14S0*200    14S0*250    14S0*300

 

COMPONENTS - T

  3"
“Q” Test Tool      14Q00300
“T” Locator 10TL*275

 

COMPONENTS - S

  2" 2 1/2" 3"
“N” Test Tool    14N01200    14N01250    14N01300
“S” Locator 10SL*200 10SL*250 10SL*300

*Replace asterisk with desired position number