TIC “PLUNK” WHISKERED BOMB HANGER (FOR CASING)

 

The TIC “Plunk” Whiskered Bomb Hanger for Casing can be used to set Wireline Memory Gauges in casing. A whisker spring is used to keep the dogs retracted while the tool string is moving downward. When the whisker spring exits the tubing, it allows the retracted dogs to expand into the locating position. Continued downward movement will allow these dogs to exit the tubing and set in the casing.
The Whiskered Bomb Hanger for Casing is equipped with a built-in hanger safety tool that will prevent
the Wireline Memory Gauges from falling downhole if a line break should occur. The Whiskered Bomb Hanger is manufactured out of stainless steel to minimize corrosion. Wrench flats are provided to prevent distortion of inside diameters.


• Pipe wrenches should not be used.

 

SPECIFICATIONS

Overall Length 31.500"
Top Pin Thread 3/4"-16
Bottom Box Thread         3/4"-16
Max. O.D. 1.500"
Cotter Pin 1/8" x 1"
Dowel Pin (2) 3/8" x 1.375"
Dogs for 4 1/2", 5 1/2", and 7" Casing

 

ASSEMBLY

  4 1/2” 5 1/2”
Part Number            48PL0700     48PL0750

 

COMPONENTS

  4 1/2” 5 1/2”
Top Sub 48PL0701 48PL0701
Top Spring 90NPL008 90NPL008
Nut 48PL0702 48PL0702
Upper Adapter 48PL0703 48PL0703
Spring Adapter 48PL0704 48PL0704
Body 48PL0705 48PL0705
Core Spring (2) 90NPL009 (2) 90NPL009
Upper Core 48PL0706 48PL0706
Swivel Arm (2) 48PL0707      (2) 48PL0707
Upper Dog Grab (2) 48PL0708 (2) 48PL0712
Lower Dog Grab (2) 48PL0709 (2) 48PL0711
Arm (2) 48PL0710 (2) 48PL0710
Lower Core 48PL0720 48PL0720
Lower Sub 48PL0721 48PL0721
Whisker Spring        90NPL005 90NPL005