TIC “PLUNK” HYDROCHRON RELEASING AND SETTING TOOL

 

The TIC “Plunk” Hydrochron Releasing and Setting Tool hydraulically sets and releases Wireline Memory Gauges. The Hydrochron can safely set and release the gauges in conjunction with the Collar, Tubing, and Casing Hanger. The Hydrochron also can set and release gauges in no-go restrictions or upon stops. The Hydrochron must be used in conjunction with the TIC “Plunk” Soft Sub. Wrench flats are provided and must be used to prevent distortion of inside diameters. The tool is made out of stainless steel to minimize corrosion.


• Pipe wrenches should not be used.

 

SPECIFICATIONS

Fishneck 1.375"
Top Pin Thread 15/16"-10
Overall Length         11.750"
Releases Soft Sub
O.D. 1.375"
Standard Oil 50 Weight
Set Screw 10-32" x 3/16" w/small piece of felt

 

ASSEMBLY

Part Number            48PL0800

 

COMPONENTS

Top Sub 48PL0801
Pin Sleeve (2) 48PL0803
Spring Retainer 48PL0804
Upper Pin 48PL0802
Housing 48PL0805
Spring 90NPL010
Pin Cup 48PL0806
Piston 48PL0808
Self Locking Nut (2) 48PL0807
Self Locking Nut with By-Pass Slot        48PL0809
Stuffing Wad 48PL0814
Lower Pin 48PL0811
Dog 48PL0812
Bottom Sub 48PL0813
O-ring (3) #006
O-ring #117