TIC “PLUNK” HANGER-SAFETY TOOL

 

The TIC “Plunk” Hanger-Safety Tool uses the weight of the Wireline Memory Gauges to keep the spring loaded dog grabs retracted. If for any reason there is a loss of line tension, the spring will cause the dog grabs to expand and catch the inside diameter of the tubing. The Hanger-Safety Tool will prevent the Wireline Memory Gauges from falling downhole if a line break should occur. With this tool, the chances of gauge replacement or costly fishing jobs are greatly minimized. An additional feature of this tool is
that it can be used to hang Memory Gauges at any point in the tubing. The Hanger-Safety Tool is manufactured out of stainless steel to minimize corrosion. Wrench flats are provided to prevent distortion of the box connection and inside diameter.


• Pipe wrenches should not be used.
• Not recommended when heavy jarring is necessary.

 

SPECIFICATIONS - ALL SIZES

Overall Length 15.500"
Top Pin Thread 3/4"-16
Bottom Box Thread         3/4"-16
O.D. 1.250"
Dowel Pins 1/4" x 1 1/4"
  1/4" x 1 1/4"
Dogs for 2 3/8", 2 7/8", and 3 1/2"

 

ASSEMBLY

  2 3/8” 2 7/8” 3 1/2”
Part Number            48PL0900     48PL0925     48PL0930

 

COMPONENTS

  2 3/8” 2 7/8” 3 1/2”
Top Sub 48PL0901 48PL0901 48PL0901
Top Spring 90NPL011 90NPL011 90NPL011
Core Cap 48PL0902 48PL0902 48PL0902
Adapter 48PL0903 48PL0903 48PL0903
Spring Adapter        48PL0904 48PL0904 48PL0904
Core Spring 90NPL012 90NPL012 90NPL012
Core 48PL0905 48PL0905 48PL0905
Arm (2) 48PL0906    (2) 48PL0906    (2) 48PL0906
Dog Grab (2) 48PL0907 (2) 48PL0909 (2) 48PL0910
Bottom Sub 48PL0908 48PL0908 48PL0908