“TICFWG” BY-PASS BLANKING PLUG (TOP NO GO)

 

The “TICFWG” By-Pass Blanking Plug allows fluid to by-pass through the side ports when running in the well. Once the plug is locked in a “TF” type profile, pressure can be held in either direction. After the well has been repaired or tested, the plug can be equalized and pulled with standard wireline tools.

 

SPECIFICATIONS

  1.78" 1.81" 1.87" 2.25"
No Go Diameter 1.865" 1.865" 1.906" 2.302"
Fishneck Diameter       1.375" 1.375" 1.375" 1.750"
Lock Diameter 1.703" 1.703" 1.703" 2.156"
Overall Length 15.60" 15.60" 15.60" 16.06"
Running Tool 41CR0200   41CR0200 41CR0200 41CR0250
Pulling Tool 40SB1200 40SB1200 40SB1200 40SB1250
  - - 40JDC200 -
Pulling Probe 14P01200 14P01200 14P01200 14P01250
O-ring #014 #014 #014 #018
Brass Pins (2) 3/16" x 15/16"   3/16" x 15/16"   3/16" x 15/16"   1/4" x 1 1/4"
O-rings (2) #011 #011 #011 #113
O-ring #110 #110 #110 #115

 

SPECIFICATIONS

  2.31" 2.75" 2.81"
No Go Diameter 2.365" 2.802" 2.865"
Fishneck Diameter       1.750" 2.313" 2.313"
Lock Diameter 2.156" 2.656" 2.656"
Overall Length 16.06" 16.69" 16.69"
Running Tool 41CR0250 41CR0300 41CR0300
Pulling Tool 40SB1250 40SB1300 40SB1300
  40JDC250 - 40JDC300
Pulling Probe 14P01250 14P01300 14P01300
O-ring #018 #018 #018
Brass Pins (2) 1/4" x 1 1/4"   1/4" x 1 1/4"   1/4" x 1 1/4"
O-rings (2) #113 #113 #113
O-ring #115 #115 #115

 

ASSEMBLY

  1.78" 1.81" 1.87" 2.25"
Part Number            14FWG178   14FWG181   14FWG187   14FWG225

 

ASSEMBLY

  2.31" 2.75"       2.81"
Part Number           14FWG231      - -