“TICZ” LOCK (BOTTOM NO GO)

 

The “TICZ” Lock Subassembly is a bottom no-go lock used in “TR” type profiles. It has two spring loaded locking dogs that prevent upward movement. The no-go shoulder is located on the packing gland which no-go’s in the “TR” profile and prevents downward movement.

 

SPECIFICATIONS

  1.78" 1.81" 1.875" 2.25"
Max. O.D. 1.750" 1.750" 1.750" 2.188"
Fishneck Diameter 1.375" 1.375" 1.375" 1.750"
Overall Length 7.500" 7.500" 7.500" 7.690"
Shear Pin Diameter    .187" .187" .187" .187"
Running Tool 41CR0200 41CR0200   41CR0200   41CR0250
Pulling Tool 40SB1200   40SB1200 40SB1200 40SB1250
  - - 40JDC200 -
Pulling Probe 14P01200 14P01200 14P01200 14P01250

 

SPECIFICATIONS

  2.31" 2.75" 2.81"
Max. O.D. 2.188" 2.688" 2.688"
Fishneck Diameter 1.750" 2.313" 2.313"
Overall Length 7.690" 8.250" 8.250"
Shear Pin Diameter    .187" .187" .187"
Running Tool 41CR0250   41CR0300 41CR0300
Pulling Tool 40SB1250 40SB1300   40SB1300
  40JDC250 - 40JDC300
Pulling Probe 14P01250 14P01300 14P01300

 

ASSEMBLY

  1.78" 1.81" 1.875" 2.25"
Part Number            14Z00200    14Z00200    14Z00200    14Z00250

 

ASSEMBLY

  2.31" 2.75"    2.81"
Part Number           14Z00250    - -