“TICFSG” BY-PASS BLANKING PLUG (SELECTIVE)

 

The “TICFSG” By-Pass Blanking Plug allows fluid to by-pass through the side ports when running in the well. Once the plug is locked in a “TF” type profile, pressure can be held in either direction. After the well has been repaired or tested, the plug can be equalized and pulled with standard wireline tools.

 

SPECIFICATIONS

  1.781" 1.81" 1.87" 2.25"
Max. O.D. 1.771" 1.802" 1.865" 2.240"
Fishneck O.D. 1.375" 1.375" 1.375" 1.750"
Overall Length 17.22" 17.22" 17.22" 17.759"
Shear Pin .187" Brass .187" Brass .187" Brass .250" Brass
Running Tool 41CR0200 41CR0200 41CR0200 41CR0250
Pulling Tool 40SB1200 40SB1200 40SB1200 40SB1250
  - - 40JDC200 -
Pulling Probe 14P00200 14P00200 14P00200 14P00250
O-ring #014 #014 #014 #018
Brass Shear Pins (2)    3/16" x 15/16"   3/16" x 15/16"    3/16" x 15/16"   1/4" x 1 1/4"
O-rings (2) #011 #011 #011 #113
O-ring #110 #110 #110 #115

 

SPECIFICATIONS

  2.31" 2.75" 2.81"
Max. O.D. 2.302" 2.740" 2.802"
Fishneck O.D. 1.750" 2.313" 2.313"
Overall Length 17.759" 18.906" 18.906"
Shear Pin .250" Brass .250" Brass .250" Brass
Running Tool 41CR0250 41CR0300 41CR0300
Pulling Tool 40SB1250 40SB1300 40SB1300
  40JDC250 - 40JDC300
Pulling Probe 14P00250 14P00300 14P00300
O-ring #018 #018 #018
Brass Shear Pins (2)    1/4" x 1 1/4"   1/4" x 1 1/4"  1/4" x 1 1/4"
O-rings (2) #113 #113 #113
O-ring #115 #115 #115

 

ASSEMBLY

  1.781" 1.81" 1.87" 2.25"
Part Number            14FSG178    14FSG181    14FSG187    14FSG225

 

ASSEMBLY

  2.31" 2.75"    2.81"
Part Number           14FSG231    - -