“TICFB-2” EQUALIZING CHECK VALVE (TOP NO GO)

 

Equalizing Check Valves are sometimes called “Standing Valves” because they prevent fluid flow in one direction (downward) while allowing full fluid flow in the opposite direction (upward). The “TICFB-2” seats on the top no-go shoulder of a “TF” type profile which prevents downward movement. It is not locked into the profile, and it has a built-in method of allowing equalizing before pulling.

 

SPECIFICATIONS

  1.78" 1.81" 1.87" 2.25"
No Go Diameter 1.802" 1.865" 1.906" 2.302"
Fishneck Diameter      1.375" 1.375" 1.375" 1.750"
Overall Length 15.68" 15.68" 15.68" 17.37"
Running Tool 41CR0200 41CR0200   41CR0200   41CR0250
Pulling Tool 40SB1200   40SB1200 40SB1200 40SB1250
  - - 40JDC200 -
O-ring #127 #127 #127 #133
S.S. Ball 1 1/8" 1 1/8" 1 1/8" 1 1/2"
O-ring #124 #124 #124 #128
O-ring #218 #218 #218 #222

 

SPECIFICATIONS

  2.31" 2.75" 2.81"
No Go Diameter 2.365" 2.802" 2.865"
Fishneck Diameter      1.750" 2.313" 2.313"
Overall Length 17.37" 18.81" 18.81"
Running Tool 41CR0250   41CR0300   41CR0300
Pulling Tool 40SB1250 40SB1300 40SB1300
  40JDC250 - 40JDC300
O-ring #133 #133 #133
S.S. Ball 1 1/2" 1 11/16" 1 11/16"
O-ring #128 #128 #128
O-ring #222 #222 #222

 

ASSEMBLY

  1.78" 1.81" 1.87" 2.25"
Part Number            14FB2178    14FB2181    14FB2187    14FB2225

 

ASSEMBLY

  2.31" 2.75"      2.81"
Part Number           14FB2231    - -