“TICRB-2” EQUALIZING CHECK VALVE (BOTTOM NO GO)

 

Equalizing Check Valves are sometimes called “Standing Valves” because they prevent fluid flow in one direction (downward) while allowing full fluid flow in the opposite direction (upward). The “TICRB-2” seats on the top no-go shoulder of a “TF” type profile which prevents downward movement. It is not locked into the profile, and it has a built-in method of allowing equalizing before pulling.

 

SPECIFICATIONS

  1.78" 1.81" 1.87" 2.25"
No Go Diameter 1.771" 1.802" 1.865" 2.240"
Fishneck Diameter    1.375" 1.375" 1.375" 1.750"
Overall Length 15.680" 15.680" 15.680" 17.375"
Running Tool 41CR0200    41CR0200    41CR0200    41CR0250
Pulling Tool 40SB1200 40SB1200 40SB1200 40SB1250
  - - 40JDC200 -
O-ring #127 #127 #127 #133
S.S. Ball 1 1/8" 1 1/8" 1 1/8" 1 1/2"
O-ring #124 #124 #124 #128
O-ring #218 #218 #218 #222

 

SPECIFICATIONS

  2.31" 2.75" 2.81"
No Go Diameter 2.302" 2.740" 2.802"
Fishneck Diameter    1.750" 2.313" 2.313"
Overall Length 17.375" 18.813" 18.813"
Running Tool 41CR0250   41CR0300   41CR0300
Pulling Tool 40SB1250 40SB1300 40SB1300
  40JDC250 - 40JDC300
O-ring #133 #141 #141
S.S. Ball 1 1/2" 1 11/16" 1 11/16"
O-ring #128 #135 #135
O-ring #222 #225 #225

 

ASSEMBLY

  1.78" 1.81" 1.87" 2.25"
Part Number            14RB2178    14RB2181    14RB2187    14RB2225

 

ASSEMBLY

  2.31" 2.75"    2.81"
Part Number           14RB2231     - -