"B" MANDREL

The Type “B” Mandrel is designed to be used in well completions that have not been equipped with landing nipples. It can be lowered to any desired depth and attached to the tubing wall as a means to set safety valves, regulators and flow beans. The Type “B” Mandrel can only hold pressure from below.

 

SPECIFICATIONS

  1 1/2" 1 3/4" 2" 2 1/2"
FISHNECK O.D. 1.188" 1.188" 1.375" 1.750"
MAX. O.D. (Slips Expanded)   1.703" 1.820" 2.078" 2.540"
MAX. O.D. (Slips Retracted) 1.480" 1.590" 1.859" 2.300"
MINIMUM I.D. 9/16" 9/16" 11/16" 7/8"
BOTTOM THREAD 7/8"-14 7/8"-14 1 3/16"-14 1 9/16"-12
RUNNING TOOL 41W01150 41W01150 41W01200 41W01200
PULLING TOOLS 40RB1150
OR 40JUC150   
40RB1150
OR 40JUC150   
40RB1200
OR 40JUC200   
40RB1250
OR 40JUC250

 

ASSEMBLY

  1 1/2"     1 3/4" 2"                       2 1/2"
Part Number            10BM0150          10BM0175          10BM0200          10BM0250

 

COMPONENTS

  1 1/2" 1 3/4" 2" 2 1/2"
Mandrel 10B00196 10B00196 10B00204 10B00223
Slip Carrier 10B00991 10B00332 10B01331 10B01336
Band 10A01608 10A01608 10A01609 10A01610
Slip (3) 10B00992     (3) 10B00988     (3) 10B01639     (3) 10B00876
Upper Cup Ring      10B00195 10B00195 10B00202 10B00224
Choke Cup (2) 81CC0150 (2) 81CC0163 (2) 81CC0179 (2) 81CC0313
Lower Cup Ring 10B00197 10B00197 10B00203 10B00222
Nut 10B00198 10B00198 10B00201 10B00220
O-Ring #212 #212 #217 #222