"PN" PLUG

 

The Type “PN” Plug is a positive plug used in conjunction with the Type “N” Locking Mandrel to hold pressure from above and below in a Type “N” Landing Nipple. This plug might be used to test tubing or to plug tubing to perform repairs or replacement of surface equipment. Equalization is achieved by pulling the equalizing prong from the plug assembly.

 

SPECIFICATIONS

  1 1/4" 1 1/2", 1 3/4"    2" 2 1/2" 3"
Fishneck O.D. .687" .812" 1.00" 1.00" 1.750"
Max. O.D. 1.095" 1.422" 1.50" 2.00" 2.50"
Running Tool 41P00125    41P00150 41P00200 41P00250 41P00300
Pulling Tool - - 40JDC138     40JDC138     40JDC250
      52G01200 52G01200 40SB1250
      40SB1125 40SB1125  
Equalizing Flow Area (sq. in.)    .049" .150" .150" .150" .150"
Lower Thread 1/4" NPT 3/8" NPT 3/8" NPT 3/8" NPT 3/8" NPT
Upper Thread 3/4"-16 7/8"-14 1 3/16"-4 1 9/16"-12 2"-12
Brass Shear Pin 1/8" x 5/8" 3/16" x 7/8" 3/16" x 7/8" 3/16" x 7/8" 3/16" x 7/8"

 

ASSEMBLY

  1 1/4" 1 1/2", 1 3/4"      2"   2 1/2" 3"
Part Number            21PN0125    21PN0150 21PN0200    21PN0250    21PN0300

 

COMPONENTS

  1 1/4" 1 1/2", 1 3/4"    2" 2 1/2" 3"
Cage 21A00042 21A00036 21A00036 21A00036 21A00036
Adapter Sub 21A00043 21A00045 21A00037 21B01187 21B01466
Prong 21B00046    21B00047 21B00043    21B00043    21B00043
Fishneck 21A00041 21A01127 21A00455 21A00039 21B01052
Watermelon    21A00040 21A00044 21A00038 21A00038 21A00038
O-ring #006 #011 #011 #011 #011
O-ring #012 (2) #113 (2) #113 (2) #113 (2) #113
O-ring #008 #012 #012 #012 #012