"PS" PLUG

 

The Type “PS” Plug is a positive plug used in conjunction with the Type “S” Locking Mandrel and Type “S” Locator to hold pressure from above and below in a Type “S” Landing Nipple. This plug might be used to test tubing or to plug tubing to perform repairs or replacement of surface equipment. Equalization is achieved by pulling the equalizing prong from the plug assembly.

 

SPECIFICATIONS

  1 1/4" 1 1/2", 1 3/4"    2" 2 1/2" 3"
Fishneck O.D. .687" .812" 1.00" 1.00" 1.750"
Max. O.D. 1.095" 1.422" 1.50" 2.00" 2.50"
Running Tool 41P00125    41P00150 41P00200 41P00250 41P00300
Pulling Tool - - 40JDC138 40JDC138 40JDC250
      52G01200 52G01200 40SB1250
      40SB1125 40SB1125  
Equalizing Flow Area (sq. in.)    .049" .150" .150" .150" .150"
Lower Thread 1/4" NPT 3/8" NPT 3/8" NPT 3/8" NPT 3/8" NPT
Upper Thread 3/4"-16 7/8"-14 1 3/16"-4 1 9/16"-12 2"-12
Brass Shear Pin 1/8" x 5/8" 3/16" x 7/8" 3/16" x 7/8"    3/16" x 7/8"    3/16" x 7/8"

 

ASSEMBLY

  1 1/4" 1 1/2", 1 3/4"    2"   2 1/2" 3"
Part Number            21PS0125    21PS0150   21PS0200    21PS0250    21PS0300

 

COMPONENTS

  1 1/4" 1 1/2", 1 3/4"    2" 2 1/2" 3"
Cage 21A00042    21A00036 21A00036    10B00223 21A00036
Adapter Sub 21A00043 21A00045 21A00037 10B01336 21B01466
Prong 21B00045 21B00048 21B00044 10A01610 21B00044
Fishneck 21A00041 21A01127 21A00455 (3) 10B00876    21B01052
Watermelon    21A00040 21A00044 21A00038 10B00224 21A00038
O-ring #006 #011 #011 #011 #011
O-ring #012 (2) #113 (2) #113 (2) #113 (2) #113
O-ring #008 #012 #012 #012 #012